Vacuum Forming · Extrusion Molding · Blow Molding
ISO 9001 Certified
[email protected]

mold-design

Vacuum Forming vs Pressure Forming: An Engineer’s Comparison

April 15, 2024
An engineering comparison of vacuum forming and pressure forming: how each works, what detail and tolerance to expect, and how…
阅读更多 →

Male vs Female Mold in Vacuum Forming: Engineering Differences That Decide Wall Thickness, Detail and Cost

October 27, 2023
Male and female vacuum forming molds touch opposite sides of the heated sheet. Here is how that choice changes wall…
阅读更多 →

How to Create a Seamless Vacuum Formed Part: An Engineering Guide

September 15, 2023
An engineering guide to seamless vacuum formed parts: forming envelope checks, mold parting geometry, draft and radii, draw-depth thinning control,…
阅读更多 →

How to Create Undercuts in a Vacuum Formed Part: Mold, Machining, or Split Design

July 28, 2023
How undercuts are created in vacuum formed parts: formed, machined, or split-part routes, material and gauge limits, and how to…
阅读更多 →

Male vs. Female Mold in Vacuum Forming: How Each Shapes the Part

July 26, 2023
Male and female vacuum forming molds control different faces of the part. Compare wall thickness behavior, surface finish, draft, and…
阅读更多 →

Types of Molds Used in Vacuum Forming: An Engineering Guide

June 5, 2023
The mold types used in vacuum forming — male, female, matched, and plug-assist — plus mold materials, draft and venting,…
阅读更多 →